Inspection of circular loom machine

In textile processing activities, the application of all kinds of textile equipment is indispensable, the role of modern mechanization also needs to rely on equipment as the main source of production power, circular loom is also commonly used mechanical equipment. What are the states that need to be checked before the circular loom runs, and what are the checks that need to be made? These are the things that operators need to master. Here, xiaobian will give you a brief introduction to the inspection work of the circular loom. Let's have a look. 1.The CAM is the heart of the circular loom, so it is forced to spray oil for lubrication. Therefore, it is necessary to regularly observe whether the lubrication of the CAM is good and whether the position of the injection pipe is correct.  2.The lubricating oil in the oil tank should be replaced every three months. When the newly purchased equipment is used for the first time, it should be replaced with new oil in 7-10 days, and the oil tank, pipeline and filter net should be cleaned.  3.All transmission mechanisms should be lubricated regularly (3 times a month). Lubricate bearings, gears, sprockets, etc.  4, regularly check whether the connection parts are loose, especially the shaking rod bolt can not be loose so as not to break the rod. The inspection work of circular loom is mainly the four aspects mentioned above, that is, the lubrication of CAM, oil tank, transmission engine and regular inspection of various parts. I hope the knowledge introduced by xiaobian can help you to use the circular loom. If you have any questions, you can communicate with us. There are many round loom brands on the market, so you can learn more about them before you buy them and buy them with high cost performance. .