Cause of broken warp thread in circular loom
2021-12-11
Circular loom, speaking of this name we are certainly very strange, but it produces products are inseparable with our life oh, such as woven bags. The production process of the woven bag needs to be processed by the circular loom. Here xiaobian will give you a popular science on the cause of broken warp silk circular loom, I hope the readers who are using the circular loom can improve their use method through reading this article.
1. The shuttle propulsion inner bearing is stuck. The way to solve this kind of problem is very simple, that is, cleaning and replacing bearings can be done, but when cleaning, we need to pay attention to cleaning some small positions.
2. No oil in the oil pool. Check the wear situation and replenish the oil level can be a good solution.
3, shuttle wheel rotation is not flexible or bearing damage. As above, cleaning the small shuttle or replacing the bearing problem is solved.
4. Slide block is damaged. The solution to this problem is relatively simple, directly replace the damaged slider can be.
After looking at the above solution, do you feel that you can also start maintenance independently? Pay attention to xiaobian and share new things tomorrow. The above article has given you a detailed introduction of the circular loom warp break reasons, as well as for each reason has been put forward specific solutions, readers interested in the words or can read carefully, I believe that you can provide help in the future life.
